Hidden House Gallery is open every Sunday and by appointment!
-
-
Latest Discussions
-
Community Notice Boards were set up by councillors for the local community to advertise their meetings etc. Originally these had padlocks and keys were given to local community groups i.e Tenants and Residents' Association. Our T&RA used to advertise our meetings, AGMs, social activities, public meetings (i.e. hustings) Give and Take events, Southwark Council run groups/events. Unfortunately the padlocks were broken and boards vandalised. Our T&RA managed to get the Lordship Lane (Small Sainsbury) one refurbished and one in Underhill Road. However, it took ages for our local councillor to discover where the keys to these padlocks were left. We had 2 people from our T&RA who regularly posted details of events and activities in the East Dulwich Community Centre. The padlocks were again broken, and various flyers were posted which rarely had any connection with the area. We have a lady, in her 80s, who several times a year still goes round posting details of our and EDCCs activities, Look out for posters announcing the next Give and Take in February, our T&RAs AGM in April. -
By Jenijenjen · Posted
As most customers going to M&S do not get there via North Cross Road and most people going down North Cross Road are not going to M&S that's not really surprising -
By Mystic Mog · Posted
Can anyone recommend a good takeaway for a mild biryani. Thanks. -
You are seeing the Lenovo logo because that  is generated by the system's firmware, known as the BIOS (Basic Input/Output System) This is part of the Power-On Self-Test (POST) process, which checks basic hardware functionality. If the system fails to proceed past the logo screen, it could indicate that the BIOS/UEFI cannot locate or access the bootable operating system. This is often due to:  If the drive has failed then the BIOS won't find the necessary files to load the OS.  Even if the SSD is operational, bootloader corruption could cause the same issue.  Misconfigured boot order or settings in the BIOS/UEFI might prevent booting.   Diagnosing SSD Failure: To confirm whether the SSD is the problem: Enter the BIOS/UEFI settings (usually by pressing a key like F2, DEL, or ESC during startup). Check if the SSD is detected in the storage or boot section. Run any available diagnostics tools in the BIOS. If the SSD isn't recognized, it's likely failed or has a loose connection. Alternatively, you can boot the system using a live USB or external OS to verify SSD accessibility.
-
Recommended Posts
Archived
This topic is now archived and is closed to further replies.