poppet27 Posted October 17, 2016 Share Posted October 17, 2016 We?ve just moved into a 3 bed, 1 bath house. It has a new Worcester combi boiler, but not a very big one.We were hoping to install a downstairs loo under the stairs, but otherwise, no plans for a second bathroom for at least 7 years.Our current shower however, is like a dribble, so we?re having to use baths. It?s just a hose connected to the bath mixer taps. Is there any way to fix this in the short term or will we always have a low pressure problem with a combi system? As we?re updating the bathroom we would like to install a new standalone rain shower, but put off if it?s never going to be powerful. Do we switch to a a cold water tank system, or is there another way? Thanks neighbours! Link to comment https://www.eastdulwichforum.co.uk/topic/127712-plumbing-and-showers-silly-question/ Share on other sites More sharing options...
Pickle Posted October 17, 2016 Share Posted October 17, 2016 Our shower pressure was awful (although we have a tank, not a combi boiler), so we put in an electric shower with built in pump. Amazing difference, and not overly expensive. Link to comment https://www.eastdulwichforum.co.uk/topic/127712-plumbing-and-showers-silly-question/#findComment-1061142 Share on other sites More sharing options...
red devil Posted October 17, 2016 Share Posted October 17, 2016 Personally, if you have the space, I'd future proof yourself and install a 'Megaflo' cylinder, which is used in conjunction with a bolier. The boiler heats up the water and it's stored in the cyclinder and released at a balanced pressure, i.e. no drop in pressure if a tap is run while the shower is on etc. The pressure is usually high enough for rain showers. No need for a cold water tank... https://www.worcester-bosch.co.uk/products/cylinders Link to comment https://www.eastdulwichforum.co.uk/topic/127712-plumbing-and-showers-silly-question/#findComment-1061143 Share on other sites More sharing options...
red devil Posted October 17, 2016 Share Posted October 17, 2016 More info... https://www.heatraesadia.com/products/cylinders-and-hot-water/unvented-cylinders.htm Link to comment https://www.eastdulwichforum.co.uk/topic/127712-plumbing-and-showers-silly-question/#findComment-1061145 Share on other sites More sharing options...
DirtyBox Posted October 17, 2016 Share Posted October 17, 2016 What's the pressure like from the bath taps? I recently moved into a new house and the shower was pretty pathetic but the bath was ok, I unscrewed the shower head from the hose and found a flow restrictor had been installed (to save water probably) which I removed and it's now pretty good - we also have a combi boiler. Link to comment https://www.eastdulwichforum.co.uk/topic/127712-plumbing-and-showers-silly-question/#findComment-1061150 Share on other sites More sharing options...
ruffers Posted October 17, 2016 Share Posted October 17, 2016 red devil Wrote:-------------------------------------------------------> Personally, if you have the space, I'd future> proof yourself and install a 'Megaflo' cylinder,> which is used in conjunction with a bolier. The> boiler heats up the water and it's stored in the> cyclinder and released at a balanced pressure,> i.e. no drop in pressure if a tap is run while the> shower is on etc. The pressure is usually high> enough for rain showers. No need for a cold water> tank...> https://www.worcester-bosch.co.uk/products/cylinde> rsWe have a megaflo, and it works perfectly. Link to comment https://www.eastdulwichforum.co.uk/topic/127712-plumbing-and-showers-silly-question/#findComment-1061196 Share on other sites More sharing options...
Townleygreen Posted October 17, 2016 Share Posted October 17, 2016 a shower pump can be inserted in your water supply to the shower, giving you a great power shower. We've got two, one on 1st and the other on 2nd floors. The ground floor one doesn't need a pump as the pressure from the water tanks on upper floors solves that problem. Link to comment https://www.eastdulwichforum.co.uk/topic/127712-plumbing-and-showers-silly-question/#findComment-1061218 Share on other sites More sharing options...
poppet27 Posted October 17, 2016 Author Share Posted October 17, 2016 My issue is though, that we have a combi boiler, not water tanks. I don't think you can pump water from a combi boiler as the water is heated as its used.Do you know if thr Megaflow can be used on a combi? I would really like a powerful shower! Link to comment https://www.eastdulwichforum.co.uk/topic/127712-plumbing-and-showers-silly-question/#findComment-1061223 Share on other sites More sharing options...
red devil Posted October 17, 2016 Share Posted October 17, 2016 I believe it can, something along the lines of connecting the combi to at least one tap, say a utilty room sink, but speak to a qualified heating engineer e.g. Peter Bennison, John Powers, McHow, all regularly recommended on here... Link to comment https://www.eastdulwichforum.co.uk/topic/127712-plumbing-and-showers-silly-question/#findComment-1061226 Share on other sites More sharing options...
poppet27 Posted October 17, 2016 Author Share Posted October 17, 2016 Thanks, I will do. Link to comment https://www.eastdulwichforum.co.uk/topic/127712-plumbing-and-showers-silly-question/#findComment-1061329 Share on other sites More sharing options...
BoilerEngineer Posted April 26, 2017 Share Posted April 26, 2017 poppet27 Wrote:-------------------------------------------------------> We?ve just moved into a 3 bed, 1 bath house. It> has a new Worcester combi boiler, but not a very> big one.> We were hoping to install a downstairs loo under> the stairs, but otherwise, no plans for a second> bathroom for at least 7 years.> > Our current shower however, is like a dribble, so> we?re having to use baths. It?s just a hose> connected to the bath mixer taps. Is there any way> to fix this in the short term or will we always> have a low pressure problem with a combi system?> As we?re updating the bathroom we would like to> install a new standalone rain shower, but put off> if it?s never going to be powerful. > > Do we switch to a a cold water tank system, or is> there another way? Thanks neighbours!A combi boiler will not be able to produce all the hot water you need. This means you will not get enough hot water out of all of your taps at the same time. You would be better suited to a system with a hot-water cylinder. Combi boilers are not necessarily suitable for every home. Link to comment https://www.eastdulwichforum.co.uk/topic/127712-plumbing-and-showers-silly-question/#findComment-1129462 Share on other sites More sharing options...
malumbu Posted April 26, 2017 Share Posted April 26, 2017 Electric shower. Bit old school but heats up mains water. Need a separate high ampage powere supply. Would have done this mayself once. I know what I am doing but I expect in wet areas you need to be qualified to put in new electric cabling.Here's some stuffhttp://www.which.co.uk/reviews/electric-showers/article/electric-shower-installation-guide Link to comment https://www.eastdulwichforum.co.uk/topic/127712-plumbing-and-showers-silly-question/#findComment-1129485 Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now